Benzocaine Theoretical Yield

Chocolate Marshmallow

I never, ever thought that you could make marshmallows at home! So when I saw that on the net there are lots of recipes for them I had to try very e. .. magic! The recipe works! It's actually very simple and fast, everything becomes easy, especially thanks to cooking thermometer! In fact, I suggest you try the recipe with the thermometer only understand why the temperature of the sugar to "eye" is very difficult! Okay any thermometer, also the oven (more common to find than those from sugar), just get to 121 ° (why 121 and not 120? Boh! I have adhered strictly to the recipe!)

Here is the translation
of recipe I used, the choice among many because I did not foresee the egg whites. I would also add my photos and comments .



CHOCOLATE marshmallows

PREP TIME:

° 30 min about the preparation.
° from 5h to overnight for the rest.


INGREDIENTS:



gelatin powder: 20g (I used the gelatin sheets)
Sugar: 330g
Glucose syrup or corn syrup " : 100ml
vanilla extract: 1 teaspoon (about 2-3g)
Cocoa powder: 2 teaspoons (about 4g)
Powdered sugar: for dusting the pan and trimming the marshmallows.


PROCEEDINGS


° Sprinkle a 20x20cm square baking pan with powdered sugar. first I have anointed the pan with a little olive oil in order to better attack the icing sugar.



· Put the gelatine to soak in 80 ml of water, directly into the food processor fitted with the whisk to mount. Allow to soak for 10 minutes.


° In a saucepan combine sugar, glucose and 80ml of water. Melt over medium heat, mixing until sugar is dissolved.


° Bring the syrup to a boil, add the cooking thermometer in the pan and wait it reaches a temperature of 121 °.
method without thermometer slightly different from the original recipe: take one teaspoon a bit 'syrup, dip the spoon in a glass full of cold water at this point to try to manipulate the syrup on the spoon (above water) dissolves if the temperature between the fingers has not yet been reached, if you can manipulate and create a ball of syrup a little 'sticky (not too hard) the temperature will be reached.


• Only start the food processor (where the jelly) at low speed and pour the syrup. Mix until the mixture is blended. Increase speed to high and fit for 8 minutes until it becomes thick and fluffy. Do not mix too much otherwise it will become difficult to remove it from the food processor. I think it is better to pour the syrup off a robot, or else you will lose half the hose running. My food processor can not be access for 8 consecutive min then up to keep it for 4-5 minutes, the result is less than the original spoumoso: (

· Join the cocoa and mix for a few seconds to redere the marbled effect.


° Pour the mixture into the pan and balance them with a spatula. Let stand for at least 5 hours or overnight.


° The day after the marshamalow unmold and sprinkle with icing sugar to make it less sticky



° one can cut into cubes with a knife or use of lightly greased stampini, poi passare ogni stellina o cubetto nello zucchero a velo.


° Ecco le stelline.



RISULTATO FINALE:

Lidocaine Hydrochloride Gel

How to make a self-made frame Friends! Venice carnival 2009

This is a real 'Art Attack!' , you'll need glue, paint, cardboard and so on! It's not hard to do but it takes a bit of time... it doesn't matter because the result is perfect! I put my Friends frame on attic door, where I made my little "video&friends corner" ♥

FRIENDS FRAME

You will need:



° Cardboards
° Scissors
° Kitchen roll
° PVA glue
° Water

To complete:
° "gypsum, plaster of Paris, chalk, plaster"... I don't know the english term! It's gypsum powder, usually you mix it with water and put it in some molds, then it becomes strong and takes that form.
° Water
° Yellow, red and blue paint or yellow and beige paint
° Brush

Let's start!



° Draw the model on a paper or on cardboard.
You could draw your model of Firends frame, or you could use mine (click on thumbnail).
Before to print it adjust the model size thinking about how big you want the frame.

Afterwars, the "making-off" pictures will show a different frame I recently made for Carnival , but the process it's the same, and the model above it's for Friends frame of course! ;)



° Trace the model on cardboard, and cut away the surplus (areas with grey line in my model).



° If you have a cardboard thin as mine, it's better to strengthen it, so glow another cardboard on it and press well.



° Mix well 1.5 tablespoon of PVA glue and more or less 125 ml of water.
Cut Kitchen roll papers in stripes.
If stripes are bigger, decorations will come more evident so I advise to make them bigger than mine. ;)



° Soak one or more paper stripes in glue-water mix, squeeze them a bit and roll them.



° Glue the stripes follow the model line on the cardboard.



° If you want you could put another bit of glue on decorations.

° Let dry.



° When decorations are dry, to smooth the look of the frame you could paint it with some gypsum powder.
(Another way is to glue plain perpendicular paper stripes on decorations.)



° To do this mix 1-2 tablespoons of gypsum powder with some glue-water mix (plus about 0.5 tablespoon of glue). You should get a smooth batter, a bit dense. You should be able to use brush to put it on frame!



° Paint with gypsum the frame and let dry.
Repeat another time (photos are about the first paint).



° When it's dry, you have almost finish!
It's paint time! Mix with wet brush yellow + a bit of + a little red, little bit of blue to get this "yellow-beige" and paint the frame, let dry and do it again if Necessary. Friends

frame it's done!

OUTCOME:

---

THE FRAME OF FRIENDS In Italian.
This is a real 'Art Attack!' serve as glue, paint, cardboard, etc!
It is not difficult, but it takes a little 'time, however it's worth it because it is perfect!
I have attached the frame to the door of the attic I used to "tv-out with friends" ♥

Materials:



of cartons
°
· Paper cutter or scissors kitchen
· Glue PVA (ihihih)
° Water For

finish: quick-setting plaster
° ° Water

· painting yellow, red and blue or yellow and beige
° Brush

started!



· Draw the pattern on a sheet or directly on the carton.
You can draw your model or use the frame of my Friends (click on thumbnail). Before you print
arranged the measures according to the size of the frame you want to achieve.

From then on, the photos of the procedure will show a different frame I did for Carnival, but the procedure is the same and the pattern that I put on is undoubtedly the frame of Friends!



· Copy or trace the pattern onto the cardboard and cut the excess (in my scheme are those with gray lines).



° If your board is up like mine, it is better to reinforce pasted on another board and pressing down to make them adhere.



° Mix well 1.5 tablespoons of white glue and about 125 ml of water.
Tear the paper towels into strips. More
strips are wide, the decorations will be more obvious, so my advice is to make them bigger than mine. ;)



· Immerse one or more strips of paper into the mix of glue and water, squeeze a little 'and roll.



° Position the strip following the design on the card.



° If you want you can go with the brush a little more 'of glue on the strips.

· Allow to dry.



° When the decorations are dry, to make the decorations more consistent with the frame, you can use the quick-setting plaster.
(Another way you may glue on the decorations of the strips at right angles and twisted individual.)



° To do this, mix 1-2 tablespoons of plaster with a little 'mix of glue + water (adding about half a tablespoon glue).
You should get a smooth and a little 'usable with dense brush.



° Spread the plaster on the frame and let dry.
Repeat the operation once again (the photos are of the first pass).



° When it is dry, you're almost done!
It 'time to paint! Mix well with a brush wet with a little yellow 'red and very few (Issime) or blue for a "yellow-beige", let it dry and if necessary passed on to another painting.

The frame is finished!

OUTCOME:

[Cross posted: forever_friends (2009_04_10)]

Wilderness Travel Trailer Manual

As some have already 'seen by others * social network * I the new site.
And 'in fact an important moment' cause I worked for four months as a slave day Saturday and Sunday night to finish it exactly the moment that I set, so as to fit all the right times and send their curriculum in other places and then get married and then do this and what I can think of and then go a place where it rains every day, and dry bones.
short but I'm tired of having that nice feeling * almost * done something that makes me feel good.
the site there are still many little things to put in place and it 'still skinny skinny (there' s just a 3D object in the gallery, so to speak), but 'them' and I can use.
E 'enjoyed every kind of feedback and criticism, and on asphalt' already 'came out that in some situations some preview images appear on cock (And I have no idea why 'they' like to put in place).
In any event, we celebrate tonight, just to establish the ritual order something to be able to start another. After
I'm going to play all weekend.
And to play Maggie, who I did not shit a lot in recent months. Then we see